Best Plasma Cutter Under 1000 – What Plasma Cutter Should I Buy?

best plasma cutter under 1000In today’s fast-moving world, the people from the past would not be able to believe their eyes. Some dollar bills can be converted easily into almost anything.

There is still a common notion that goes around that higher quality comes with a higher price. The same idea prevails when the idea of getting the best plasma cutter under 1000 is concerned. However, our experience and the research carried out shows otherwise.

The research carried out is satisfactory. It will prove to be beneficial for those who are looking for buying best plasma cutter under 1000 dollars. A few of these best devices have been discussed below with a brief description.

5 Best Plasma Cutter Under 1000

[table id=4 /]

Razorweld JRWPC 45LT Plasma Cutter

Razorweld JRWPC45LT Plasma Cutter, 45 ampThis plasma cutter is easy to transport between places. It is one of the most efficient devices available in the market these days. A clean process characterizes the apparatus from starting until finishing.

Razorweld Plasma cutter allows to interchange compatible torches when required. It further adds to the value of this apparatus. The cutting capacity ranges from 20 to 45 amperes. It can be selected depending upon the workpiece and job to be performed.

Pros
  • The cuts are finished neatly, and the final appearance is relatively clean.
  • The welding functions can also be performed in a pretty decent way, adding value to the job.
Cons
  • The plasma gun, ejecting the hot jet plasma, is of relatively lower quality.

 

Hobart 500564 Airforce 12ci Plasma Cutter

Hobart 500564 Airforce 12ci Plasma Cutter with Built-In Air Compressor 120VThe availability of a built-in compressor characterizes this plasma cutter. The best plasma cutter under 1000 makes use of inverter technology. It results in producing more than satisfactory results. The cut made using this device is precise and entirely accurate.

This plasma cutter comparatively produces less amount of the metallic waste to clean up. Moreover, the heat-affected zone of the device is relatively small. The whole package is handy and compact to be used.

Pros
  • The flame does not need to be tuned.
  • The built-in air compressor makes the package ready to cut anytime.
  • No pressure setting is required at all.
Cons
  • This plasma cutter operates at relatively slower speeds.
  • Cannot be used for painted or rusty metallic surfaces.

 

Lotos Technology LTP8000 Non-Touch Pilot Arc Air Plasma Cutter

Lotos Technology LTP8000 80 Amp Non-Touch Pilot Arc Air Plasma Cutter, 1 Clean Cut, 220 240V, BlueThis plasma cutter is one of the most powerful best plasma cutter under 1000 available in the market right now. The pilot arc feature is handy for operating on rough surfaces. The user can achieve smooth, clean, and uniform cuts on the metal surfaces.

The package also incorporates the latest high-frequency inverter technology. This best plasma cutter under 1000 helps to deliver further a constant, precise, and continuous current. It is quite handy to be used by both the DIY users and the professional ones as well.

Pros
  • Compatible to be used with rough, painted and rusty surfaces.
  • Produces minimal slag.
  • Works without distorting the workpiece.
Cons
  • A good-sized compressor is required to make the apparatus work.
  • Despite the need of separate compressor, the device is comparatively expensive.

 

Lotos LTPDC2000D Non-Touch Pilot Arc Plasma Cutter

Lotos LTPDC2000D Non-Touch Pilot Arc Plasma Cutter Tig Welder and Stick Welder 3 in 1 Combo Welding Machine,½ Inch Clean Cut,BrownThis plasma cutter is a 3 in 1 product. It can be used to perform three different jobs:

  • Best Plasma Cutter

  • Best TIG Welder

  • Best Stick Welder

This product also makes use of the pilot arc technology. And therefore, it is excellent to work on rusty, painted and rough metallic surfaces. Since it comprises of non-touch pilot arc, the device has a longer consumable life. It is compatible with dual voltages. This best plasma cutter under 1000 makes use of non-hazardous compressed air to perform the job.

Pros
  • Can be used for rough, painted and rusty surfaces.
  • A single portable package, capable of performing three different jobs.
  • Characterized by dual voltage compatibility.
Cons
  • A separate compressor for plasma cutter is required.
  • Not suitable for aluminium welding.

 

Forney 317 250 P+ Plasma Cutter with Air Compressor

Forney 317 250 P+ Plasma Cutter with Air CompressorIts lightweight and built-in compressor characterize this product. The built-in compressor is also accompanied by an integrated air pressure regulator and dryer. It uses an electrical arc and compressed air to perform its job.

It makes use of drag torch technology. best plasma cutter under 1000 allows precise cuts by moving the torch directly across the metallic surface. Thermal overload protection is also present to prevent the package from any damage.

Pros
  • A built-in compressor adds value to the product.
  • Being lightweight, it is easy to use and operate. It is also portable.
  • Plasma Cutter with Air Compressor
Cons
  • Time delay is the biggest concern. Hence not recommended for multiple and continuous small cuts.
  • Not generally suitable for rusty and painted surfaces.

 

Buyer’s Guide [ Best Plasma Cutter ]

A few traits of a number of selected best plasma cutter under 1000 have been mentioned above. All of them are intended for different nature of jobs. Hence one cannot simply rank them on the basis of their feature. Below provided characteristics are something that might help a buyer to make his choice.

  • High Power

Unlike welding, with the plasma cutter, the case of power requirement generally remains the same. Higher power generally assures smooth and clean cuts. This is obviously subjected to the condition of the rest of the machine as well.

  • Pilot Arc Function

Pilot arc function allows you to get a relatively precise arc. This makes welding good and clean. Pilot arc, in general, is ideal for the use of beginners. However, professionals also like it.

  • Adjustable Voltage

Adjustable voltage adds value to the product. So that it may be used anywhere without worrying about the power cut out. Sometimes, the sites are not wired for 220-volt operation. In that case, a fixed voltage machine might be useless.

Conclusion

This article has presented users with a variety of best plasma cutter under 1000. They are all less than 1000 dollars. But they all differ in their characteristics. This review has highlighted the pros and cons of these devices, as well. The choice of the buyer depends upon the type of job intended to be performed. A few of the presented best plasma cutter under 1000 were expensive than the rest of others. This might be because of the added features or safety levels. This review, in short, has covered a vast range of plasma cutters available in the market.

 

Leave a Comment